Setting the clock
The clock must be set to the correct time of day for the automatic oven timing
functions to work properly.
•
The time of day cannot be changed during a timed cooking, a delay-timed
cooking, or a self-cleaning cycle.
•
You can choose between a 12-hour or 24-hour display. The default is 12-hour.
How to set the clock
1.
Press Clock.
2.
Enter the current time in hours and minutes on the number pad, eg.
1, 3, 0, for 1:30.
3.
Press Clock or START/SET to save the changes.
How to change between a 12-hour and 24-hour display
1.
Press Broil and 4 on the number pad at the same time for 3 seconds.
The display will show the present mode (eg. 12 hour).
2.
Press 0 on the number pad to select 12 hour or 24 hour.
3.
Press START/SET to save changes.
NE59N6630S_AA_DG68-01050A-02_EN+MES+CFR.indb 23
Setting the kitchen timer
The kitchen timer serves as an extra timer that will beep when the set time has
elapsed. It does not start or stop cooking functions. You can use the kitchen timer
with any of the other oven functions.
How to set the timer
Press Timer On/Off.
1.
2.
Enter the amount of time you want. Enter the amount of time you want using
the number pad, eg. 1, 5. The timer can be set for any amount of time from
1 minute to 9 hours and 59 minutes.
If you make a mistake, press Timer On/Off and enter the amount of time again.
3.
Press Timer On/Off to start the timer.
4.
When the set time has elapsed, the oven will beep and the display will show
"End" until you press Timer On/Off pad. You can cancel the timer at any time
by pressing Timer On/Off.
English 23
2018-12-18
7:17:31