Fog Control; Strobe Control; Audio Sensitivity Knob - Chauvet DJ Obey 40 D-Fi 2.4 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

The Obey 40 D-Fi™ 2.4 has a dedicated fog button that will work with compatible

Fog Control

CHAUVET fog machines. See the Chauvet website for available fog machines:
www.chauvetlighting.com.
To operate one or more fog machines, do the following:
1. Connect the fog machines to the fog control out port on the back panel.
Note: See the fog machine's User Manual for information on linking more than one
fog machine.
2. Turn on the fog machine or machines.
3. Wait for the <Fog> LED to come on.
4. Press <Fog> to generate fog.
T
he <Fog> LED indicates that the fog machine is at maximum temperature and ready to
generate fog. When the LED is not on, the fog machine might still generate fog, but not for the
maximum rated time.
The Obey 40 D-Fi 2.4 has a dedicated strobe button that will work with compatible

Strobe Control

CHAUVET
strobes.
See
the
Chauvet
website
for
available
strobes:
www.chauvetlighting.com.
To operate one or more strobes, do the following:
1. Connect the strobe or strobes to the strobe control out port on the back panel of the
Obey 40 D-Fi™ 2.4.
Note: See the strobe's User Manual for information on linking more than one strobe.
2. Turn on the strobe or strobes.
3. Press <Strobe> to start the strobe.
Note: The <Strobe> button is a momentary button. The light will strobe for as long as
the button is held down. When it is not pressed, the strobe is dark.
The LED indicator for the strobe button will flash at the same rate as the strobe.
The audio sensitivity knob makes the board more or less sensitive to sounds. When the
Audio Sensitivity
knob is as far clockwise as it can go, the board is the most sensitive to sound.
Knob
Page 38 of 176
Obey 40 D-Fi 2.4 User Manual Rev. 3

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

09080697

Tabla de contenido