Dmx Cabling; Dmx Cabling Diagram; D-Fi™ Communication; D-Fi™ Diagram - Chauvet DJ Obey 40 D-Fi 2.4 Manual De Usuario

DMX cabling can be used along with D-Fi™ transmission, or instead of D-Fi™ transmission, for

DMX Cabling

products that are not D-Fi™ compatible. To use DMX cabling connect the DMX cable from DMX Out
of the board to DMX In of the first product in the rig.
Then connect another DMX cable from DMX Out of the first product in the rig to DMX In of the next
product.
Continue connecting until all the products are connected.
DMX Cabling
Diagram
Additional
DMX DMX
DMX DMX DMX DMX
In Out Products
In Out In Out
1st Product 2nd Product 3rd Product
D-Fi™ communication can be used alone, or incombination with DMX cabling. Products that are
D-Fi™
D-Fi™ compatible receive D-Fi™ signal directly from the Obey 40 D-Fi 2.4, and products that
Communication
require DMX cabling can be connected to D-Fi™ distribution products, such as D-Fi™ Hub and
D-Fi™ Stream 6 which receive the D-Fi™ signal and send it out via DMX cables.
Products that require DMX cables can also be connected directly to the Obey 40 D-Fi 2.4 as shown
above in DMX Cabling Diagram.
Products Requiring
DMX Cables
D-Fi™ Compatible
Products
D-Fi™ Diagram
D-Fi™
Obey 40 D-Fi 2.4
Distribution
Product
Page 22 of 176 Obey 40 D-Fi 2.4 User Manual Rev. 3