Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Instructions
FEATURES
4
5
6
7
8
9
9
10
ICE CUBE TRAY
Operating Instructions
OPERATING YOUR
REFRIGERATOR
1) FREEZER BINS
1
2) REFRIGERATOR BINS
3) CAN DISPENSER
4) FREEZER SHELF
5) FREEZER TEMPERATURE CONTROL KNOB
2
6) REFRIGERATOR TEMPERATURE CONTROL
7) LAMP COVER
8) REFRIGERATOR SHELVES
9) CRISPER
10) LEVELING LEG
3
The Ice Cube Tray is flexible. Twist tray to remove the ice cubes. If the ice
cube tray is frozen solid to the evaporator surface, run a little water over
the tray. Never use a knife or other metal instruments to remove the ice
cube tray, as this may damage the evaporator.
TEMPERATURE CONTROL
• There is a temperature digital display panel in the fresh
compartment(See below figure).Digits in the upper line are celsius
temperature,while digits in the bottom line are fahrenheit temperature.
• Press the "Subtraction sign" or "Plus sign" to reach the needed
temperature.
• The first time you turn the unit on, pls select 8? and let the unit run for at
least 2 hours before putting foods inside. That will ensure the cabinet is
thoroughly chilled before food is put in.
PANEL
5
Publicidad
