Palazzetti ECOFIRE Serie Manual De Instrucciones página 31

on the rear panel.
5.8.1
A) Pressure gauge
B) Automatic release valve
C) Load tap
D)
E) Water return from the system (G3/4"F)
F) Safety valve (G3/4"F)
G) Closed expansion vessel
H) Circulator
I) Anti-condensation valve
5.8.2
Connect the stove to the heating system via
Prepare a waste
diameter, which connects to the safety valve
(F) discharge.
After making the water connections, it is necessary
to proceed with the boiler load (tap C) and the
related vent (B), monitoring the pressure (1-1.2
bar cold) through the pressure gauge (A).
If necessary ensure that the closed expansion
vessel (G) preload is correct.
MAXIMUM OPERATING PRESSURE: 2,5 bar
It is good practice to proceed with washing the
system before commissioning the operational
system.
of the product, a water softener is recommended
to ensure that the water hardness of the system
is less than 25-27 French degrees and to add
anti-algae treatment to the system's water as
necessary.
A
tube, of appropriate
B
I
H
C D
G
A
E F
31