QFX PBX-3200BT Manual Del Usuario página 6

PBX-3200BT REMOTE CONTROL
1. STANDBY: Press standby button to make the unit to be standby mode.
2. Input Mode Button: Press this button to toggle between the various inputs (LINE, USB, SD, FM).
3. Mute: Press this button to mute the track for USB/SD.
4. Track Button: Press this button to move to the certain track above 100th or 200th on USB flash
drive or SD card.
5. KEY Number for selecting the certain track for USB flash drive or SD card.
6. STOP: Press this button to stop the track for USB flash drive or SD card.
7. VOL-: Press this button to reduce the master volume for USB/SD/LINE/iPod/FM.
8. REP: Press this button to repeat the playing track for USB flash drive or SD card.
9. Previous Track: Press this button to select the previous track for USB flash drive or SD card and
previous channel for FM.
10. Next Track: Press this button to select the next track for USB flash drive or SD card and next
channel for FM.
11. EQ: Press this button to select the EQ mode of Normal, Jazz, Rock, Pop, Class.
12. VOL+: Press this button to increase the master volume for USB/SD/LINE/iPod/FM.
13. PLAY/PAUSE: When on the mode of USB flash or SD, press this button to play or pause the
track. When on the mode of FM, press this button to auto scan all channels.
14. USB/SD: Press this button to select the mode between USB flash drive or SD card.
PBX-3200BT MICROPHONE
1. Before powering on the microphone, be sure to set the Microphone Volume Knob to zero. Once
the microphone is powered on, slowly increase the microphone volume.
2. If you notice static or distortion in the microphone, check if XLR is fixed to the body properly or
echo volume is too high.
3. When not in use, turn off the power of the microphone.
1 2
5
6
7
8
9
-5-
3
4
10
11
12
13
14
Microphone
ON/OFF
PBX-3200BT