ELECTROTEK ET-F18SF Manual De Instrucciones página 10

FAN COMPONENTS.
EXTENDING
MAST
MOTOR
SCREWS COVER
ASSEMBLY STEP BY STEP.
BASE
SUPPORT
PROPELLER
NOTE.
The part model may vary according to the model of
fan but it does not change nor the function of that
piece nor the mounting mode. It is mounted exactly
the same.
1. CATCH THE BASE SUPPORT AND PUT IT ON FIRM FLOOR.
2. PLACE THE EXTENSIBLE MAST IN THE BASE, MAKING TO
COINCIDE THE HOLES, AND THEN PUT THE SCREWS.
3. PUT WASHERS AND SCREWS.
4. SCREW AND SMOOTHLY TIGHTEN THE 4 SCREWS.
FRONT GRID
ADJUSTMENT
MAST
REAR GRID
SCREWS