Publicidad
Idiomas disponibles
Idiomas disponibles
12. Loosen the nut, extend the mast and tighten the nut.
13. Loosen the motor support screw.
14. Insert the motor support into the mast.
15. Tighten the screw and keep it firmly fixed.
16. The complete mast with the engine is already assembled.
5. In order to fit the screws
cover, first remove the mast
fastener.
- Remove the fastener nut.
- Pull fixer upwards.
6. Put the screws cover.
7. Search mast flange.
8. Find fixing hole.
9. Insert the fixer into the mast
so that the fixer hole is aligned
with the mast flange.
10. Ensure alignment.
11. Put the nut.
Publicidad
