Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Product Features
5
NG24 Port LEDs: There are two green LEDs per RJ45 port. The top LED is ON when
a connection is present and blinks when the port is active. The bottom LED is OFF for
10/100 Mbps connections and ON for 1000 Mbps connections.
Note: Not compatible with PoE (Power-over-Ethernet) applications.
6
SFP Port LEDs: The green LED is ON when a connection is present and blinks when the
port is active.
7
SFP Ports: Connection points for Mini-GBIC SFP modules, which support uplink to
other switches using optical fiber or copper at 1000 Mbps.
Quick Installation
Desktop Installation
1
Attach the four included rubber feet to
the bottom of the unit. Place the switch
on a flat desktop surface. Inspect and
install the power adapter to a proper AC
power source.
2
Connect the power supply to the switch.
The Power LED will illuminate when the
switch turns on.
3
Ensure adequate ventilation around the
switch for proper cooling.
4
Connect the network cables to the
network switch.
16-09-176-9335EA.indb 4
FLAT DESKTOP SURFACE
1
2
3
4
4
9/15/2016 2:07:10 PM
Publicidad
Tabla de contenido
