Sauder Dresser Manual Del Usuario página 15

Step 10
Fasten the BRACE (SS) and FOOT BASE (UU) to the
å
BOTTOM (E). Use four BLACK 1-1/4" FLAT HEAD
SCREWS (VV) through the BASE, through the BRACE,
and into the BOTTOM. Then, push the FOOT (TT) into
the FOOT BASE (UU).
NOTE: Turn the screw end of the FOOT completely in.
å
Adjustments will be made to the FOOT after the unit is
standing upright.
Turn completely in.
www.sauder.com/services
SS
UU
TT
Caution
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
BLACK 1-1/4" FLAT HEAD SCREW
E
414765
VV
(4 used in this step)
Page 15