Components; Assembly; Installation Of The Base; Installation Of The Column - Sagola Dry Tech DT3/6 Manual De Instrucciones

1

5. Components

1. Distance sensor
3
2. Cassette
3. Support arm
4. Column
5. Lifter
6. Lifter switch
7. Power switch ON/OFF
8. Base
9. Wheel
4
2
5
7
6
8
9

6. Assembly

The shortwave infrared curing lamp is divided into 3 parts (base, column and cassette).

6.1. Installation of the base:

- Open the packing of the base.
- Install the four wheels on the base
respectively and tighten up the
screws. Usually, the wheels with
brakes should be mounted on the
rear of the base.

6.2. Installation of the column:

- Open the packing of the column.
- Put the column vertically on the
top of the base, directly engage the
screw holes and tighten up using
the screws.
- Connect the support arm with the
column for supporting the cassette
and connect the lifter with the
column to control the up and down
movement of the cassette.
ENGLISH