Installation
Instructions
[T_ CHANGE COOKTOP BURNER
ORIFICES (CONT.)
CENTER BURNER
20,000 BTU/hr Tri-Ring
Burner (PGP986 and CGP6SO
Models)
spuds located
through these
openings.
Main Orifice
Main Orifice
Simmer Orifice
Main Orifice
_]
CHANGE COOKTOP BURNER
ORIFICES (CONT.)
LEFT FRONT BURNER
(PGP986 and CGP650
Models)
Griddle Screw
The griddle screw
is marked with N
for natural gas
and L for liquefied
petroleum.
Main Orifice
NOTE: The main orifice is located in the center of
the burner, while the griddle screw is located to the
right of the center of the burner.
[]
Install the LP Propane orifices and griddle
screw (on PGP986 and CGP6S0models only)
in their precise locations as noted in the
earlier illustrations.
r_
Return the natural gas orifices and griddle
screw to the bracket and attach the bracket
and the instruction
sheet to the pressure
regulator
using the screw removed previously.
r_
Replace the burner heads, caps and grates.
14