Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
This drawing is not the bill of materials.
SAGOLA 455
17
1 ø 1.40 (Std.)
2 ø 1.00
3 ø 1.20
4 ø 1.80
5 ø 2.20
Nº
Cod.
U.
01
49000566
1
06
02
49000567
1
07
03
49000568
1
08
04
49000569
1
09/1
05
52350409
1
09/2
Never point the jet of the unit towards yourself, other
people or animals. The solvents and spray devices used
can cause serious injury.
If the product is sprayed or splashed in the eyes it can
cause serious injury.
Never attempt to stop the application stream or a leak
with your hand or any other part of your body.
The premises where work is carried out must have
sufficient ventilation in accordance with current legislation
and regulations. Near the unit, only keep the amount of
product and solvent required for the job being done at that
time. After the job has been completed, the surplus
solvents and product to be applied must be returned to
their specific storage location. Keep the working area
clean and free of potentially dangerous waste (solvents,
rags, etc. ).
While work is in progress, there must not be any source of
ignition (naked flames, lighted cigarettes, etc.) in the
working area as these might generate easily flammable
gases. Similarly, type approved work hazard protection
means must be used (for breathing, hearing, etc.) in
accordance with current legislation.
13. PRODUCT BREAKDOWN
03
01
02
14
Nº
Cod.
U.
Nº
49000570
1
10
49000571
1
11
49000572
1
12
49000581
1
13
49000573
1
14
14. HEALTH AND SAFETY
turbo
16
10
12
13
11
15
15
1 110V/60Hz
2 220V/50Hz
Cod.
U.
Nº
49000574
1
15/1
49000579
49000575
1
15/2
49000582
49000576
1
16
49000580
49000577
1
17/1
10110501
49000578
1
17/2
10110502
If the unit is used in an inadequate manner or its compo-
nents are altered in any way, severe material damage
may occur and bodily harm may be caused to the opera-
tor, other personnel and/or animals and may even cause
death.
SAGOLA, S.A. accepts no liability for any damages
caused by the incorrect use of the equipment.
The moving parts may cause serious injury. Keep tour
distance from these when starting up the equipment or
when using it.
Always use type approved breathing equipment in
compliance current Standards and Regulations in order to
protect yourself from emissions produced during applica-
tion.
As a general preventive measure, we advise you to wear
protective goggles in accordance with the specific
environmental regulations and features of the work
centre.
Use gloves when handling the product (see the
manufacturer's recommendations) and when cleaning the
gun it when during the use of the gun the environmental
noise exceeds 90 bathe use of type approved hearing
-13-
PRO
04
05
07
06
1 110V/60Hz
09
2 220V/50Hz
Cod.
U.
Nº
Cod.
1
17/3
10110503
1
17/4
10110505
1
17/5
10110506
1
1
08
U.
1
1
1
Publicidad
Capítulos
Tabla de contenido
