Culligan US-600A Instrucciones Para La Instalación Y El Funcionamiento página 4

Performance Data continued
Test Conditions
Flow Rate = As noted for each
individual filter
cartridge
Inlet Pressure = 60 psi (4.1 bar)
pH = 7.5 ± 1
Temperature = 68°F ± 5°F
(20°C ± 2.5°C)
Warranty
This warranty applies to the Filter Housings only. It does NOT apply to any
disposable filter cartridge, which has a life expectancy that varies with the water
being filtered. This warranty covers defects in materials and workmanship only
for five full years from original date of delivery. Culligan will replace any part
which in Culligan's opinion is defective, unless: (1) any part of the system has
been subjected to any type of tampering, alteration, or improper use after
delivery, or (2) any part of the system has been repaired by anyone not
approved by Culligan. Our obligation does not include the cost of shipment
of materials. Culligan is not responsible for damage in transit, and claims
for such damage should be presented to the carrier by the customer.
This product has been designed solely for use as a housing for a disposable
filter cartridge. It is NOT warranted against freezing, and neither this product
nor its parts is warranted against defects or deterioration caused by uses for
which this product was not expressly intended.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER
WARRANTIES, EXPRESSED OR IMPLIED, WHETHER ORAL OR ARISING
BY USAGE OF TRADE OR COURSE OF DEALING, INCLUDING, WITHOUT
LIMITATION, ANY WARRANTIES OF FITNESS OR MERCHANTABILITY. THIS
WARRANTY IS THE PURCHASER'S SOLE AND EXCLUSIVE REMEDY. IN NO
EVENT SHALL Culligan BE LIABLE FOR ANY ANTICIPATED OR LOST PROFITS,
INCIDENTAL DAMAGES, CONSEQUENTIAL CHARGES OR OTHER LOSSES,
WHETHER BASED ON BREACH OF CONTRACT, TORTIOUS CONDUCT OR
ANY OTHER THEORY, INCURRED IN CONNECTION WITH THE PURCHASE,
INSTALLATION, REPAIR OR OPERATION OF THE OPAQUE FILTER HOUSING.
Culligan DOES NOT AUTHORIZE ANYONE TO ASSUME FOR IT ANY LIABILITY
OR MAKE ON ITS BEHALF ANY ADDITIONAL WARRANTIES IN CONNECTION
WITH THE OPAQUE FILTER HOUSING OR ANY PART THEREOF.
For servicing under this warranty, return any defective part to YOUR
RETAILER within the five-year period referred to above.
SEE BELOW INDIVIDUAL WARRANTY AS IT PERTAINS TO YOUR
CULLIGAN PRODUCT.
5-YEAR: US-600
A
©2019 Culligan International Company, Ensamblado en China
Operating Requirements
Pressure: = 30–125 psi (2.1-8.6 bar)
Temperature = 40–100°F
(4.4–37.7°C)
Turbidity = 5 NTU Max.
Culligan International Company
9399 W. Higgins Road, Suite 1100
Rosemont, Illinois 60018
M-F 8:00 a.m – 4:30 p.m. CST
IOWA RESIDENTS ONLY:
Store or seller's name
Address
City
Zip
Telephone
Seller's signature
Customer's signature
www.culligandiy.com
Customer Service
Phone: 1-800-721-7360
The US-600 with D-10 is certified by IAPMO R&T against
A A
NSF/ANSI Standard 42 for the reduction of aesthetic Chlorine
Taste and Odor and nominal Particulate Class III.
The US-600 with D-20 is certified by IAPMO R&T against
A A
NSF/ANSI Standard 42 for the reduction of aesthetic Chlorine
Taste and Odor.
The US-600 with D-30 is certified by IAPMO R&T against
A A
NSF/ANSI Standard 42 for the reduction of aesthetic Chlorine
Taste and Odor and nominal Particulate Class I. Standard 53 -
Cyst, Turbidity, and Asbestos reduction.
The US-600 with D-40 is certified by IAPMO R&T against
A A
NSF/ANSI Standard 42 for the reduction of aesthetic Chlorine
Taste and Odor and nominal Particulate Class I. Standard 53 -
Lead, Cyst, Turbidity, Mercury, Lindane, Atrazine and Asbestos
reduction.
01020691-01021336 Rev C 12/19
State
Date