Cleaning And Storage; Technical Data; Guarantee - BOMANN BS 973 CB Instrucciones De Servicio/Garantía

Ocultar thumbs

Contenido

página de 42

/ 42
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

Nozzle Attachment

Crevice and

jointed nozzle:

For vacuuming upholstery, curtains and in

corners and crevices etc.

„2-in-1" nozzle: When this is folded together

it can be used as a groove nozzle. If you

would like to use the brush nozzle, pull the

brush section in the direction of the arrow

until it locks in place.

Floor nozzle:

To clean carpets or smooth surfaces.

Smooth ﬂ oors: Press down the lever with

Carpets:

Releasing

the nozzles:

Pull these off while turning slightly.

Air Slide

Open the air slide on the hose handle in order to regulate the

airﬂ ow or to clear any particles sticking to the nozzle.

Dust bag replacement display (6)

Hold the hose up into air. If the dust bag change display lights

up, the bag is full. Please change it.

Changing the dust bag

•

Pull the plug out of the socket.

•

Open the lid of the dust bag compartment by the handle (7).

•

Remove the bag by pulling the retainer carefully upwards so

that you have easier access to the bag. Then remove the

dust bag by pulling it upwards.

•

Insert a new bag. Please ensure that the bag is located

correctly in the guide mechanism. Then reinsert the retainer.

Close the cover so that it snaps into place.

Filter

Your appliance has two ﬁ lters.

Motor protection ﬁ lter (inlet ﬁ lter):

The inlet ﬁ lter is located in the dust bag compartment. The ﬁ lter

is located vertically in the rear section of the dust housing. Re-

move the ﬁ lter by pulling upwards. Clean the engine protection

ﬁ lter after 10 dust bag changes. If necessary, the ﬁ lter can also

be washed in warm water without any additives. Place it back

into place only once it is completely dry!

Outlet ﬁ lter:

The appliance is also equipped with an outlet ﬁ lter. This ﬁ lter is

to be found under the ﬁ lter cover (8). Open the ventilation grille

by pressing together the lever on the side of the ventilation grille.

Then pull the grille out towards the front. Remove the ﬁ lter and

clean as described above. Please re-insert the ﬁ lter correctly

and close the ventilation grille (until it clicks in place).

05-BS 973 CB 25

Cleaning

•

Storage

•

the brush symbol with your

foot. The brush is now

visible.

Press the lever In the oppo-

site direction. The brushes

are now retracted.

Model:...........................................................................BS 973 CB

Power supply:............................................................230 V, 50 Hz

Power consumption:

Protection class:.......................................................................... ΙΙ

This device has been tested according to all relevant current

CE guidelines, such as electromagnetic compatibility and low

voltage directives, and has been constructed in accordance with

the latest safety regulations.

Subject to technical changes without prior notice!

The device supplied by our Company is covered by a 24 month

guarantee starting on the date of purchase (receipt).

During the life of the guarantee any fault of the device or its

accessories ascribable to material or manufacturing defects will

be eliminated free of charge by repairing or, at our discretion, by

replacing it. The guarantee services do not entail an extension

of the life of the guarantee nor do they give rise to any right to a

new guarantee!

Proof of the guarantee is provided by the proof of purchase.

Without proof of purchase no free replacement or repair will be

carried out.

If you wish to make a claim under the guarantee please return

the entire machine in the original packaging to your dealer

together with the receipt.

Defects to consumables or parts subject to wearing as well as

cleaning, maintenance or the replacement of said parts are not

covered by the guarantee and hence are to be paid!

The guarantee lapses in case of unauthorized tampering.