Pioneer FH-S720BS Manual De Operación página 8

Resetting the microprocessor
The microprocessor must be reset in the following situations:
– Before using this unit for the first time after installation
– If the unit fails to operate properly
– When strange or incorrect messages appear on the display
1
Press the RESET button with a pen tip or other pointed instrument.
Setup menu
When you turn the ignition switch to ON after installation, the setup menu appears in
the display.
WARNING
(Only for FH-S720BS/S722BS/MVH-S620BS/S622BS)
Do not use the unit in standard mode when a speaker system for network mode is connected to the
unit. Do not use the unit in network mode when a speaker system for standard mode is connected to
the unit. This may cause damage to the speakers.
1
Turn the M.C. dial to select the options, then press to confirm.
To proceed to the next menu option, you need to confirm your selection.
Menu Item
LANGUAGE
[ENG](English),
[ESP](Spanish),
[FRA] (Canadian
French)
Description
Select the language to display the text information from a
compressed audio file.
- 8 -
RESET button