8
8
PARTS AND FEATURES
PARTS AND FEATURES
CONTROL PANEL
Display varies by model(LDS5540)
Display varies by model(LDS5540)
Cycle Options
Press the desired cycle and then select the options for that
cycle.
SANITARY
This high-temperature rinse sanitizes dishes and glassware in
accordance with NSF/ANSI Standard 184 for residential dish-
food establishments.
EXTRA DRY
Select the EXTRA DRY option for better drying performance.
This option adds 60 minutes of extra drying time to the cycle.
EXTRA RINSE
The Extra Rinse symbol indicates that an extra rinse has been
added to the cycle.
DELAY START
The Delay Start feature allows you to delay the start of a se-
lected cycle. Each time the Delay Start button is pressed, the
delay time will increase an hour. The delay start time can be
set from 1 to 19 hours, in one-hour increments.
POWER
Press the Power button to turn on the control panel. If no
cycle is selected within four minutes, the dishwasher will
After the cycle is complete, the power automatically turns
If there is a power surge, power outage, or disruption of
any kind, the PF indicator will display and power will be au-
restarted.
TO CANCEL A CYCLE
To cancel a cycle, open the door and then press and hold
the Extra Dry and Extra Rinse buttons simultaneously for
approximately three seconds. The drain pump will activate
and the cycle will cancel. The display will show "dr" and
the dish-washer will drain the water. After the dishwasher
is drained, the power will turn o .
If power is turned on and no cycle has been selected, the
dishwasher will power o within four minutes.
CHIME ON/OFF
To enable or disable the chime, rst, turn on the dishwasher.
Press and hold the Extra Dry and Delay Start buttons sim-
ultaneously for approximately three seconds.
CHILD LOCK
The Child Lock feature helps prevent your settings from be-
ing changed during a cycle. Selecting this feature locks all
of the buttons, except for the Power button, on the control
panel. This feature does not lock the door.
To activate the Child Lock:
1. Press the Power button.
2. Select the cycle (and desired options).
3. Press and hold the Extra Rinse and Delay Start buttons for
three seconds. The Child Lock indicator will illuminate in
the display once the Child Lock is activated.
DIGITAL DISPLAY
The Digital Display on the control panel shows the ESTIMAT-
ED cycle time. When the dishwasher is powered up, the dis-
play will be blank. When the cycle and options are selected,
the display will show the total estimated time to complete
those selections. During operation, the display shows the re-
maining estimated operating time.
NOTE
• The estimated time shown in the display does not include
delay times for heating water, etc.
• If Delay Wash is selected, the display shows the delay time
in hours.
• Time may vary depending on the soil level of your load.
• The RINSE AID symbol
SMART DIAGNOSIS
Should you experience any problems with your dishwasher,
it has the capability of transmitting data to your Smart Phone
using the LG Smart Laundry & DW Application or via you tele-
phone to the LG call center.
NOTE
Smart Diagnosis is a troubleshooting feature designed to as-
sist, not replace, the traditional method of troubleshooting
pends upon various factors, including, but not limited to, the
reception of the cellular phone being used for transmission,
any external noise that may be present during the transmis-
sion, and the acoustics of the room where the machine is lo-
nosis would accurately troubleshoot any given issue.
indicates that the rinse aid
-
-