Bissell SPOTBOT 1711 Serie Guia Del Usuario página 12

Manual Cleaning
6
When the cleaning is complete, lightly
drag the suction nozzle across the stain
without pressing the trigger. This will help
dry the cleaned area.
8
Press the STOP button to turn off the
machine, then disconnect the cleaning
tool from the vacuum flex hose by
pushing down on the button lock and
pulling straight off (do not twist tools
to remove them).
Tips While Cleaning
• Periodically clean out the black valve inside of the dirty water/collection tank.
12
www.BISSELL.com
7
Before turning off the SpotBot, suction
up clean water to thoroughly rinse out the
inside of the vacuum flex hose. Then, lift
the vacuum flex hose upwards to drain
any remaining water into the dirty tank.
9
Unplug the machine and wrap the cord
around the cord wraps. Attach the Tough
Stain Brush to the base of machine. Wrap
the hose around the machine and secure
into the hose connector.