Ridgid Contact Information; Description - RIDGID PEX-One Manual De Proprietário

RIDGID Contact
Information
If you have any question concerning this
RIDGID ® product:
– Contact your local RIDGID distributor.
– Visit RIDGID.com to find your local
RIDGID contact point.
– Contact Ridge Tool Technical Service
De part ment at rtctechservices@emer -
son.com, or in the U.S. and Canada call
(800) 519-3456.

Description

The RIDGID ® PEX-One Crimp Tool is an elec-
tro-mechanical tool, which when used with ap-
propriate dies, is designed to crimp fittings
(such as ASTM F1807) to the required dimen-
sions for proper installation.
When operated, an internal electric motor pow -
ers a screw forward applying force to the jaws
to close the dies on the fitting. The tool auto-
matically retracts when the crimp has been
completed.
The jaw lever is used to open the head to allow
one handed operation. An adjustable hand
strap is supplied that can be mounted to either
side of the tool to improve one handed grip.
The tool head includes a die detent to allow
dies to be quickly and easily changed. A work
light is supplied for better visibility and also to
indicate the tool's status (tool ON/OFF, temper-
ature out of range, charge battery, etc.).
Control Marking Description
On/Off Switch
Run Switch
Reverse Button
Jaw Lever
Figure 4 – Controls Chart
085-003-980.10_REV. A
I/O Main tool power switch (I = On, O = Off)
— Depress to crimp fitting. Release when crimp complete.
— Allows tool to be reversed without completing crimp. If used, crimp
is NOT complete and must be repeated.
— Used to open jaws. Tool will not run when jaws are fully open.
PEX-One Crimp Tool
Hand
Grip
12V
Battery Warning
Reverse
Button
Label
Hand Strap
Figure 1 – PEX-One Crimp Tool
ON/Off
Switch
Figure 2
Model No. PEX-One
Serial No.
Figure 3 – Machine Serial Number -
The first 4 digits (Circled) indicate
the year and month of the manu-
facture. (12 = year, 06 = month).
Jaw
Lever
Work
Moveable
Light
Strap Anchor
(one per Tool)
Die
Detent
Run Switch
Side
Jaws
Plate
Fixed
Strap
Die
Anchors
Caddy
Slot
Serial
Plate
Ridge Tool Company
Elyria, Ohio / USA
Electro Crimp Tool
Dies
5