Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Connecting to Networks and Devices
Wi-Fi Networks
With Wi-Fi, you can use high-speed Internet access
within the coverage of the wireless access point. You
can enjoy wireless Internet with Wi-Fi without extra
charges. Once the Wi-Fi setting is On, a list of active
and in-range Wi-Fi networks is displayed. You may
need a password depending on the network.
Turn on Wi-Fi and connect to a network
1. Apps > Settings > Wireless & networks > Wi-Fi
settings > Wi-Fi
2. A checkmark indicates that Wi-Fi is on.
3. A list of active and in-range Wi-Fi networks will
load. Touch the network you wish to connect to.
4. If the network is open, touch Connect. If the
network is secured with a password, enter the
password and touch Connect.
NOTE: If you are out of the Wi-Fi zone or set Wi-Fi
to Off, additional charges may be applied by your
mobile operator for mobile data use.
USB Tethering & Portable Wi-Fi hotspot
USB tethering and portable Wi-Fi hotspot are great
features when there are no wireless connections
available. By using USB tethering, you can share your
device's mobile data connection with a single PC via
USB cable. This will provide an internet service to a
PC over the mobile network.
• Apps > Settings > Wireless & networks > Tethering
& portable hotspot > USB tethering
A checkmark indicates that USB tethering is on.
NOTE: To use USB tethering, you need to install
the "LG USB Driver" on your PC first.
To download the LG USB Driver, visit LG.com
(http://www.lg.com/us). Locate the search box
in the upper right corner of the page and enter
your device's model number. From the SUPPORT
list, select your model. Scroll down and select
the USB Driver. When prompted, select Run and
follow the subsequent prompts to install the USB
Driver on your PC.
By turning your device into a portable Wi-Fi hotspot,
you can share your device's data connection with
more than a single device at once.
29
Publicidad
Capítulos
Tabla de contenido
