Knick Stratos Pro A2 Serie Manual De Instrucciones De Inicio Rápido página 11

Display Action
The determined cell
factor and zero point
are displayed.
The "hourglass" icon is
blinking.
Press enter to proceed.
Display of selected
process variable (here:
mS/cm). Now the de-
vice is in HOLD mode:
Reinstall the sensor
and check whether the
message is OK.
MEAS ends calibration,
REPEAT permits repeti-
tion.
With MEAS selected:
Press enter to exit
calibration.
Calibration
Remark
Display of conductiv-
ity and temperature,
Sensoface is active.
After end of calibra-
tion, the outputs
remain in HOLD
mode for a short
time.
After display of
GOOD BYE, the
device automatically
returns to measuring
mode.
11