Jensen VM9214 Instrucciones De Operación página 15

Aspect Ratio
Press the DISP button (10) on the remote control or WIDE button (4) on the
monitor to adjust the aspect ratio as follows:
Image/Display Settings
Video Output Modes
Table 2 shows the video output mode for each playing source.
AM/FM TUNER
DVD
AUX IN
*CVBS – Composite Video Baseband Signal
Picture Adjustment
To adjust monitor display settings, perform the floowing steps:
1. Press the PIC button (24) on the remote control or monitor (2) repeatedly
to move from the "BRIGHT" setting to "CONTRAST".
2. Turn the rotary encoder to adjust the setting level.
3. Press the PIC button (24) on the remote control or monitor (2) 1-3 times to
exit the picture adjustment menu.
FULL
The entire screen is extended
horizontally to the aspect ratio of 16
to 9. The extension ratio is the same
at any point.
NORMAL
The conventional display image has
a 4 to 3 ratio of horizontal to vertical,
leaving a blank area on the right and
left sides of the display.
STANDBY
Screen becomes black. Touch
screen to resume.
Table 2: Video Output Modes
Playing Source Video Output Modes
RGB Mode
RGB Mode
CVBS Mode
12
VM9214