Velleman CAMTVI2 Manual Del Usuario página 5

6. Replace the outer ring over the inner ring and turn in a clockwise
direction to fix.
7. Connect and power your camera (see below). Check the viewing angle
on your PC.
8. Adjust the position and viewing angle if necessary.
6. Connection
1. Connect the power terminal of the camera to a 12 VDC regulated
power supply.
2. Connect the video output of the camera to the video input of your DVR
using a 75 Ω coaxial cable.
Remarks:
 Only use a regulated 12 VDC power adapter. Using any other type will
damage this camera.
 Protect the connectors against moisture by applying some insulating
tape over the connectors.
7. Camera Configuration
This camera has its own configuration menu. Either of the two methods
below allows access the menu.
V. 01 – 12/02/2015
CAMTVI2
5 ©Velleman nv