Bushnell TROPHY CAM 119537 Manual De Instrucciones página 19

The SETUP Menu – Parameters and Settings List
w/Descriptions
Parameter
Mode
Image Size
(only affects
still photos
in Camera or
Hybrid modes)
Image Format
(only affects still
photos-
format for video
is tied to Video
Size)
Capture
Number
(only affects
still photos
in Camera or
Hybrid modes)
Settings
(Bold=default)
Camera, Video,
Hybrid
3M Pixel,
5M Pixel,
8M Pixel,
Full Screen,
Wide Screen
1 Photo,
2 Photo,
3 Photo
Description
Selects whether still photos or video
clips are captured when the camera
is triggered. Hybrid mode combines
both Camera and Video, so a still
photo and a video clip are both
captured for each trigger.
Selects resolution for still photos
from 3 to 8 megapixels. Higher
resolution produces better quality
photos, but creates larger files
that take up more of the SD card
capacity (fills up faster). 5M is a good
compromise between quality and
file size.
Selects 4:3 (Fullscreen, like old TV
sets) or 16:9 (Widescreen, like new
flat TVs) "aspect ratio" for still photos.
If you like to view your photos on a
TV set or computer monitor, you can
set the format to match it.
Selects how many photos are taken
in sequence per trigger in Camera
mode. This setting affects photos
taken in Field Scan mode as well (to
snap two photos every 10 minutes,
for example). Please also refer to the
Interval parameter.
19