Determining Maximum Appliance Wattage; Connecting The Inverter - Wagan Tech ELITE 200W PRO Manual De Usuario

Elite™ 200W PRO by Wagan Tech

DETERMINING MAXIMUM APPLIANCE WATTAGE

Do not exceed the 200 watt maximum AC load or the inverter will shut down.
Most electrical tools, appliances, and audio/video equipment have labels that
list the unit's power requirements in watts. If the tool or device is rated in amps,
multiply the amps by 120 (120V AC) to determine the watts. For example, an
appliance rated at 0.5 amps will draw 60 watts.
Remember to consider the startup surge that motorized appliances will cause. Do
not exceed the 400 watt momentary surge rating of this inverter. This can cause
immediate overload shut down and or blow a fuse.

CONNECTING THE INVERTER

DC Plug Adapter Cord
1. Connect an insulated copper wire to the ground terminal. The other end
of the ground wire should be connected to a proper grounding point. Use
the shortest practical length of wire. Connect this wire to the chassis of
your vehicle or to the grounding system in your boat. In a city, the ground
wire can connect to a metal cold water pipe that goes underground. In
remote locations, the ground wire can be connected to an earth ground.
In the unlikely event of a short circuit, operating the inverter without proper
grounding can result in electric shock. Do not directly connect this ground
wire to the negative DC terminal
7
®
WATTS = VOLTS × AMPS
www.wagan.com