Disposal/Recycling Of Inverter - Wagan Tech ELITE 200W PRO Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

PROBLEM: Inverter Shut Down – Fault LED Lit
Reason
Equipment being operated draws too
much power.
PROBLEM: Continuous Buzzing Sound
Reason
Input voltage is below 10.5 volts.
Poor or weak battery condition.
Poor or loose cable connection.
Inadequate power being delivered to
the inverter or excessive voltage drop.

DISPOSAL/RECYCLING OF INVERTER

Electronic products are known to contain materials that are toxic if improperly
disposed. Contact local authorities for disposal and recycling information.
Wagan Tech and wagan.com are trademarks of Wagan Corporation.
User's Manual—Read before using this equipment
©2019 Wagan Corporation. All Rights Reserved.
Solution
Do not use the equipment with this
inverter; use a higher wattage inverter.
Solution
Keep input voltage above 10.5 volts.
Recharge or replace battery.
Inspect terminals and tighten all
connections.
Use heavier gauge DC cables.
Keep cable length as short as possible.
10

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

2600

Tabla de contenido