LG WFS1959EKD El Manual Del Propietario página 39

SmartDiagnosis
1
Close the washer door, and press the POWER button.
2
Place the phone to SmartDiagnosis
3
Cold Wash
Long press
4
Hold the phone while data is transmitted.
5
After the data transmission is completed, listen to the diagnosis result from the consultant.
NOTE
Smart Diagnosis is a troubleshooting feature designed to assist, not replace, the traditional method of
troubleshooting through service calls. The effectiveness of this feature depends upon various factors,
including, but not limited to, the reception of the cellular phone being used for transmission, any
external noise that may be present during the transmission, and the acoustics of the room where the
machine is located. Accordingly, LG does not guarantee that Smart Diagnosis would accurately
troubleshoot any given issue.
TM
• If you manipulated other button or dial before
pressing Cold Wash button, turn off the
power and start again from the beginning.
display.
TM
• Make sure that the
speaking side of the
phone to face
SmartDiagnosis
display
button to activate smart diagnosis.
• Place the phone near the
SmartDiagnosis
display, and long press
Cold Wash button
until tak tatk tak sounds.
• Keep placing phone to SmartDiagnosis
display while data for smart diagnosis is being
transmitted. The time remaining for data
transmission will be displayed on screen.
• Transmission sound may be irritating. For
proper diagnosis, do not take off the phone.
You can press power button to stop diagnosis
function and the sound.
• When data transmission is completed, the
power is automatically turned off with End
display after a few seconds.
TM
TM
TM
39