Specifications; Tuneup Specifications; Quick Reference Information - Honda iGX700 Manual Del Propietário

Specifications

iGX700 (TXA2 Type)
Length×Width×Height
Dry mass [weight]
Engine type
Displacement
[Bore×Stroke]
Net power
(in accordance with SAE J1349*)
Max. Net torque
(in accordance with SAE J1349*)
Engine oil capacity
Cooling system
Ignition system
PTO shaft rotation
iGX800 (TXA2 Type)
Length×Width×Height
Dry mass [weight]
Engine type
Displacement
[Bore×Stroke]
Net power
(in accordance with SAE J1349*)
Max. Net torque
(in accordance with SAE J1349*)
Engine oil capacity
Cooling system
Ignition system
PTO shaft rotation
* The power rating of the engine indicated in this document is
the net power output tested on a production engine for the
engine model and measured in accordance with SAE J1349 at
-1
3,600 min (rpm) (Net Power) and at 2,500 min
Net Torque).
Mass production engines may vary from this value.
Actual power output for the engine installed in the final
machine will vary depending on numerous factors, including
the operating speed of the engine in application, environmental
conditions, maintenance, and other variables.
16
429×483×438 mm
(16.9×19.0×17.2 in)
47.1 kg (103.8 lbs)
4-stroke, overhead valve,
2 cylinders (90° V-Twin)
3
688.0 cm (41.97 cu-in)
[78.0×72.0 mm (3.07×2.83 in)]
16.5 kW (22.4 PS, 22.1 bhp)
-1
at 3,600 min (rpm)
48.3 N∙m (4.93 kgf∙m, 35.6 lbf∙ft)
-1
at 2,500 min (rpm)
Without oil filter replacement:
1.5 L (1.6 US qt, 1.3 lmp qt)
With oil filter replacement:
1.7 L (1.8 US qt, 1.5 lmp qt)
Forced air
Full transistorized ignition
Counterclockwise (from PTO end)
429×492×438 mm
(16.9×19.4×17.2 in)
46.9 kg (103.4 lbs)
4-stroke, overhead valve,
2 cylinders (90° V-Twin)
3
779.0 cm (47.52 cu-in)
[83.0×72.0 mm (3.27×2.83 in)]
18.6 kW (25.3 PS, 24.9 bhp)
-1
at 3,600 min (rpm)
54.5 N∙m (5.56 kgf∙m, 40.2 lbf∙ft)
-1
at 2,500 min (rpm)
Without oil filter replacement:
1.6 L (1.7 US qt, 1.4 lmp qt)
With oil filter replacement:
1.8 L (1.9 US qt, 1.6 lmp qt)
Forced air
Full transistorized ignition
Counterclockwise (from PTO end)
-1

Tuneup Specifications

ITEM
Spark plug gap
Valve clearance
(cold)
Other
specifications

Quick Reference Information

Fuel
Engine oil
Spark plug
Maintenance Before each use:
(rpm) (Max.
ENGLISH
SPECIFICATION
0.7–0.8 mm
(0.028–0.031 in)
IN: 0.20±0.02 mm
EX: 0.20±0.02 mm
No other adjustments needed.
Unleaded gasoline (Refer to page 7).
U.S. Pump octane rating 86 or higher
Except Research octane rating 91 or higher
U.S. Pump octane rating 86 or higher
SAE 10W-30, API SJ or later, for general use.
Refer to page 8.
BPR5ES (NGK)
• Check engine oil level. Refer to page 8.
• Check air filter. Refer to page 9.
First 20 hours:
Change engine oil. Refer to page 8.
Subsequent:
Refer to the maintenance schedule on page 7.
MAINTENANCE
Refer to page 10
See your servicing
dealer