Rigging; Panel Attachment - EuroLite LED C-Panel Manual Del Usuario

Make sure that the area below the installation place is blocked when rigging, derigging or servicing the
fixture.
The maximum ambient temperature t
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like
short-circuit, burns, electric shock, lamp explosion, crash etc.

RIGGING

C-Panel attachment in suspended ceilings
Step 1: Prepare an opening with the following dimensions in the desired location of the suspended
ceiling: 280mm (vertical) x 300mm (horizontal) x 50mm (depth).
Step 2: Position the LED C-Panel in the square in the suspended ceiling, so that the anchoring clips rest
and the panel fits snuggly.
Before taking into operation for the first time, the installation has to be approved by an expert!
= 45° C must never be exceeded.
a
DANGER TO LIFE!
11/22 51930510_V_1_0.DOC