Operation; Cleaning And Maintenance; Technical Specifications - EuroLite LED C-Panel Manual Del Usuario

OPERATION

When installing the device, make sure there is no highly-inflammable
material (decoration articles, etc.) within a distance of min. 0.5 m.
Connect the connection-cable ends with the sockets of the LED luminaries and the controller.
Connect the contoller to the mains with the power-plug.
With the POWER-button on the controller, you can switch the device on and off.
You can select the programs by pressing the buttons on the controller.

CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Panel/piece:
Supply voltage:
Power consumption:
Dimensions with frame (LxHxW):
Weight:
Maximum ambient temperature t
Maximum housing temperature t
Number of LEDs:
Please note: Every information is subject to change without prior notice. 06.10.2005 ©
DANGER OF FIRE!
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
:
a
(steady state):
B
5 V, DC
5 W
320 x 320 x 90 mm
0.8 kg
45° C
60° C
48
12/22 51930510_V_1_0.DOC