Kenwood KDC-X997 Guia De Inicio Rapido página 13

USB connector
(0.8m, 2.5ft)
To SiriusXM Connect Vehicle Tuner.
(optional accessory)
If no connections are made, do not let the wire come out from
the tab.
Blue/White
(Power control wire)
Blue (Antenna control wire)
Brown (Mute control wire)
Orange/ White
(Dimmer control wire)
Light Blue/ Yellow
(Steering remote control wire)
To USB device.
To KCA-RC107MR/ KCA-RC55MR
(optional accessory) (KMR-555U only)
Microphone (Accessory5)
(KDC-X997, KDC-BT955HD only)
P.CONT
ANT.
CONT
MUTE
ILLUMI
REMOTE CONT
STEERING WHEEL
REMOTE INPUT
USB maximum power supply current
: DC 5 V = 1 A
When using the optional power amplifier, connect
this wire to its power control terminal.
Depending on what antenna you are using, connect
either to the control terminal of the motor antenna,
or to the power terminal for the booster amplifier of
the film-type or short pole type antenna.
(Max. 300mA, 12V)
When connecting to the Kenwood navigation
system: Refer to your navigation manual.
When connecting to a car telephone: To connect
the terminal that is grounded when the telephone
rings or during conversation. (KDC-X697, KDC-655U,
KMR-555U only)
To car light control switch.
To use the steering wheel remote control feature,
an exclusive remote adapter (not supplied) that
matches your car is required.
<
To connect the
KCA-RC107MR/ KCA-RC55MR,
consult your KCA-RC107MR/
KCA-RC55MR manual.
English | 13