Shenzhen Creative Industry Co. Oxy-One Plus PC-60F Manual De Usuario página 58

 When the measurement ends up for Spot check
mode, the measured SpO
analysis result of pulse rhythm will be displayed on
the screen, as shown in figure 5E.
Other result descriptions see Appendix I.
Menu
Long time pressing display key can enter the setup
menu screen.
"Beep"：Pulse beep option. If it is set to on, every
pulse beat makes a beep.
"Mode": to set the measuring mode. "Continuous"
and "Spot check" for optional, the default is "Spot
check".
Figure 5E Figure 6
, PR value and the
2
8