Shenzhen Creative Industry Co. Oxy-One Plus PC-60F Manual De Usuario página 59

Menu setup
Short time press Display Key to choose the setting
item; Longtime press Display Key to active the setting
item, then short time press it to modify the setting
parameter; Next, longtime press Display Key to
confirm the modification and exit from this setting
item. At last, move the setting item to "Save, exit
menu", and long time pressing Display Key to store the
modification and exit from the setup menu.
Attention to the operation
 The finger should be put into the sensor correctly.
 Do not shake the finger and relax during
measurement.
 Do not put wet finger directly into sensor.
 Avoid placing the device on the same limb which
is wrapped with a cuff for blood pressure
measurement or during venous infusion.
 Do not let anything block the emitting light from
device, i.e. do not use finger nail polish/paints.
 Vigorous exercise and electrosurgical device
interference may affect the measuring accuracy.
 The orientation-sensor works on the basis of the
9