Panacom LP-8794 Manual Del Usario página 6

- Insert the USB/SD card to correct slot.
- Wait for 6-10s, once the machine read the Total tracks, will
auto-play the tracks.
- Press M button to convert USB/SD Tracks. (default for U-disc play)
- Press Play. re-pressed, pause.
- Press Next, play next track.
- Press Play previous track.
- Keep Pressing Next for 3s, can enlarge the volume of source-disc.
- Keep pressing Prev for 3s, can reduce the volume.
BT Connection Output function
- To connect BT Connection speakers via BT.
- Turn on the BT Connection speakers when the turntable is on,
and then turn BT Connection speakers to BT mode, then it will
connect directly.
- If cannot connect quickly, press the NO.3 BT connection reset
button once.
Selection of built-in speakers or output BT Connection speakers
-Turn the button of NO.6, can choose built-in speakers or
BT Connection speakers.
- When turn to off/turn up, it will play the built-in speakers.
- When turn to on/turn down, it will play the output BT
Connection speakers.
Pg. 6