MAINTENANCE
Replacing the stylus
1) Push the arm lock to release the tone-arm
2) Take off cap of the cartridge to expose the needle out.
3) Separate the cartridge from the socket lightly.
4) Take off the audio-line from the cartridges completely.
5-8) To fit a new one just in opposite deals. Insert the audio-line
accordingly, and install the cartridge to the socket ligthly.
Please exercise extreme care whilst performing this operation so
as to avoid the tone arm and audio line wires from any damage.
NOTES:
We advise you to clean your records with an anti-static cloth to
preserve its quality.
For the same reason your stylus should be replaced periodically
(approximately every 250 hours)
Dust the stylus from time to time using a very soft brush soaked
in alcohol.
WHEN CARRYING YOUR RECORD PLAYER DO NOT FORGET TO:
• Replace the protective cap on the stylus.
• Put the rest clip into the pick-up arm.
Pg. 7