Product Dimensions; Venting Requirements - Haier HCH6500ALS Manual Del Usuario

FOR MOBILE HOME INSTALLATIONS
The installation of this range hood must conform to the Manufactured Home
Construction Safety Standards, Title 24 CFR, Part 328 (formerly the Federal
Standard for Mobile Home Construction and Safety, Title 24, HUD, Part 280) or when
such standard is not applicable, the standard for Manufactured Home Installation
1982 (Manufactured Home Sites, Communities and Setups) ANSI A225.1/NFPA
501A, or latest edition, or with local codes.

PRODUCT DIMENSIONS

(27.2 cm)
23⅝ "
(60.0 cm)
INSTALLATION CLEARANCE
It is important to install the range hood at the correct height from the cooktop.
Hoods mounted too low could result in heat damage; while hoods mounted too high
may decrease performance and efficiency.
Height from Cooktop Surface to Bottom of Hood:
Electric
Gas

VENTING REQUIREMENTS

Makeup Air
Local building codes may require the use of makeup air systems when using
ventilation systems greater than specified CFM of air movement. The specified CFM
varies from locale to locale.
Consult your HVAC professional for specific requirements in your area.
6
11¹⁵⁄₁₆ "
10¹¹⁄₁₆ "
(30.4 cm)
Minimum:
24" (61 cm)
30" (76 cm)
26⅜ "
(67.0 cm)
35⅜ "
(90.0 cm)
Suggested
Maximum:
36" (91 cm)
36" (91 cm)
46⅝ "
(118.5 cm)
Max