Maintenance And Storage - GRE VCB10P Manual De Instrucciones

6.2 Back filters cleaning
(1) Press and hold the button at the front end of the filter cover to remove the whole filter cover from the
body;
(2) Screw out the rear cover of the filter cover,
(3) Clean the metal filter screen in the filter cover;
(4) Tighten the rear cover of the filter cover, and assemble the filter cover to the body.
1. 2. 3.
Metal filter screen
6.3 battery replacement
Open the screw, loosen the handle, take out the battery pack, gently press the battery power cord to separate
and replace the battery.
1. 2. 3. 4.

Maintenance and storage

1. The battery discharges itself during storage. Make sure the robot is fully charged before storage.
2. When not in use, you must recharge the battery at least every three months.
• Unplug the external adapter from the socket and then the charging cable from the external adapter and
the robot.
• Remove the accessories from the robot. If necessary, rinse the robot and accessories with clean water.
Do not use detergent.
• Make sure the robot is drained before storage.
• Use a wet cloth to clean and dry the robot and its accessories.
• Store in a well ventilated place away from sunlight, heat, fire sources, pool chemicals and children.
• The storage environment temperature should be 10ºC– 25ºC (50ºF– 77 ºF). Note: higher temperature may
shorten battery life.