Tabla de contenido
Publicidad
OPT5
(A)
(B)
(C)
(D)
OPT6
OPT7
44
(1)
(3)
(5)
(2)
(4)
(6)
(3)
(1)
(2)
English
11. Optional blade usage
WARNING
• When sharpening, removing, or reattaching the
blade, be sure to wear thick, sturdy gloves and
use only proper tools and equipment to prevent
injury.
■ CHOOSE THE BLADE
Choose a suitable recommended cutting attachment
(7)
according to the object to be cut. (OPT5)
• When replacing blade always be sure to use
products which have been certified by RedMax.
(1) 9" 22-tooth : SST229
(2) 9" 24-tooth : SST249
(3) 8" 8-tooth :
(4) 9" 8-tooth :
(5) 8" 4-tooth :
(6) 9" 4-tooth :
(7) Nylon line head
(A) Under growth
(B) Heavy weeds
(C) Light weeds
(D) Grass
■ SET UP THE BLADE
1. Detach the line head assembly. (OPT6)
2. Put on the blade, making the marked side face the
shaft side, put the holder and the cover on, and
fasten the blade with the nut. (OPT6)
(1) Cover :
(2) Holder (B) : 6019-13250 (STANDARD)
(3) Nut :
■ BALANCE UNIT
1. Put on strap and attach unit to strap.
2. Slide clamp up or down until unit balances with head
just touching on the ground. (OPT7)
■ STARTING THE ENGINE
Please refer 5.For safe operation (P.12), 8.Operation
(P.26).
WARNING
• The product is equipped with a centrifugal clutch
mechanism, so the cutting attachment could
SGB088
SGB089
SGB048
SGB049
TIGHTENING TORQUE :
130~174 in-lbs
(14.7~19.6 N.m.)
3540-13283
T3002-13260 (STANDARD)
Publicidad
Tabla de contenido
