Installation And Commissioning - brennenstuhl WV 4/16A IP44 Manual De Instrucciones

089417 BA_Wandverteiler WV 4_16 4_32.qxp 07.02.18 15:31 Seite 14
Distribution box layout
10
5
1
10
2
10
8
Fig. A: Example of 32 A distribution box
Bottom of housing
Top of housing
Carry handle
Window
Residual current device
Protective equipment
Pre-assembled cable feeds

Installation and commissioning

The activities described in this chapter may only be performed by a qualified electrician!
The device is intended for vertical wall mounting only.
The proper operating position is with the hinged lids of the sockets opening upwards.
WARNING
Connecting the device to a supply cable with insufficient cable cross-section and/or an
insufficient upstream fuse could result in a fire which may cause injuries or lead to an overload
and damage the device. Please observe the information on the name plate!
DANGER
Working at live parts may cause severe or fatal injuries.
– De-energize the supply cable of the device for installation and mounting work.
– Secure the system against unintended re-activation of the supply voltage by other persons.
– Ensure that the supply cable is de-energized before starting installation or mounting work.
– Ground and short-circuit.
– Cover or fence off adjoining live parts.
14
7
3
10
4
6
10
9
10
13
WV 4/16A IP44 · WV 4/32A IP44
11
12
11
12
11
12
Fig. B: Example of 32 A distribution box
CEE socket
Schuko socket
Housing screws
µ
Mounting holes
¸
Threaded holes
¹
Connection socket
12
11
12
9
11
12