Guarantee; Declaration Of Conformity (Ec) - Greencut GTC300X Manual De Instrucciones

82

GUARANTEE

GREENCUT guarantees all GREENCUT products for a period of 24 months (valid for Europe). The warranty is subject
to the date of purchase taking into account the intended use of the product. As a condition subject to warranty, the
original receipt must be presented indicating the date of purchase and its description as well as the defective tool.
The warranty does not cover normal wear and tear, especially on blades, blade fasteners, turbines, light sources,
fan and transmission belts, impellers, air filters, spark plugs and damage caused by improper use, especially non-
compliance with operating and maintenance instructions.
In the event that repairs or modifications have been made by the consumer or other than with original GREENCUT
spare parts, the warranty will be voided.
In the event of a justified warranty claim, we are entitled, at our discretion, to repair or replace the defective tool free
of charge. Other claims beyond this warranty are not valid.

DECLARATION OF CONFORMITY (EC)

PRAT INTERNATIONAL BRANDS S.L., owner of the GREENCUT brand, located in Calle Migdia S / N. 43830 -
Torredembarra, SPAIN, declares that the GREENCUT GTC300X power tillers, as from 2015 series onwards, are in
accordance with the requirements of the applicable European Parliament Directives and of the Council:
• Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and
amending Directive 95/16/EC
• Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation
of the laws of the Member States relating to electromagnetic compatibility.
• Directive 2000/14/EC of the European Parliament and of the Council of 8 May 2000 on the approximation of
the laws of the Member States relating to the noise emission in the environment by equipment for use outdoors.
The product delivered coincides with the prototype that was submitted for CE exam.
Torredembarra, 22 May 2015,
Albert Prat Asensio, CEO (Authorised representative and responsible for technical documentation).