Desktop; Software Installation; Operating System; Software - Bosch 1 687 023 689 – 692 Instrucciones De Funcionamiento

i
For further information on installation in the tes-
ter refer to the fitting instructions "EPS 708"
(1 689 978 559).
Fig. 12: Installation position of tower in test bench
4.2.2

Desktop

i
For further information on installation refer to the
operating instructions "KMA 802/822".
Fig. 13: Desktop installation position
(left: in trolley, right: in test bench)
Robert Bosch GmbH
1 687 023 689 – 692 | 19
4.3

Software installation

4.3.1

Operating system

!
The "END-USER LICENSE AGREEMENT (EULA) FOR
MICROSOFT SOFTWARE" (EULA.XPS) can be found
on the desktop. Please heed the information contai-
ned in this.
i
WIN 7 is pre-installed as operating system.
1. Supply the product with power.
2. Switch on the multi-point connector.
3. Switch on the On/Off switch on the back of the PC.
4. Switch on the PC by way of the Standby button.
 The operating system starts up.
 The language settings are displayed.
5. Select the local language.
6. Heed and follow the instructions on the screen.
 The PC is ready for operation.
4.3.2

Software

The software (e.g. BEA-PC, FSA, ESI[tronic], EPS) is
supplied with the product. If the software is not pre-
installed, it must be installed using the data carrier pro-
vided with the product.
4.3.3

doPDF

If printing problems are encountered (e.g. on
HP printers in conjunction with ESA), the program
"doPDF" can be installed from the directory
'C:\BOSCH_PR\DOPDF\DOPDF-7.EXE' and set up as
standard printer.
en
|
1 689 989 190 2018-02-24