Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Attach Wall Plate
STEP 2B
CAUTION:
Avoid potential personal injury or property damage!
•
Mount the wall plate
•
Minimum solid concrete thickness: 8 in. (203 mm)
•
Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
•
Minimum horizontal space between fasteners: 4 in. (101.6 mm)
1.
Position the wall plate
2.
Drill three pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm). Never drill into the mortar between blocks.
1
16
10
directly onto the concrete surface
16
on the wall at your desired height. Level the wall plate and mark the hole locations (two at the top/one at the bottom).
16
Min.
4 in. (101.6 mm)
Solid Concrete or Concrete Block Installation
Concrete Installation Kit is not included
(see page 5) Contact Customer Service at
877-689-1665 to have the additional hardware
shipped directly to you.
2
3 in. (75 mm)
3/8 in.
(10 mm)
Publicidad
Tabla de contenido
