Onn ONA16TM010 Manual Del Usuario página 6

STEP 1 Attach Brackets to TV
1.1 Select TV Screw Diameter
Hand thread screws into the threaded inserts
on the back of your TV to determine which
screw diameter (M4, M5, M6, or
M4 M5 M6
6
1.2 Select TV Screw Length
If your TV has a flat back, AND you want your TV closer to
the wall, use the shorter screws (a).
M8) to use.
Use the spacers and longer screws (b) to accommodate:
• Round/irregular back TVs
• TVs with inset mounting holes
M8
• Extra space needed for cables
a
FLAT BACK
b
ROUND BACK INSET HOLES CABLES
Standard configurations
are shown. For special
applications, or if you
are uncertain about your
hardware selection,
contact Customer Service
at 877-689-1665.
CAUTION:
Verify adequate thread
engagement with your screw/
washer/spacer combination
AND TV bracket (STEP 1.3).
-
Too short will not hold the TV.
-
Too long will damage the TV.
Too Short
Correct
Too Long