Before Using This Product; Product Care - FujiFilm XC16-50mmF3.5-5.6 OIS II Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33

Before Using This Product

Some lens features are not available with older
versions of the camera fi rmware. Be sure to up-
date the camera fi rmware to the latest version.
Instructions on viewing the camera fi rmware
version and updating camera fi rmware are
available from the following website:
http://www.fujifilm.com/support/digital_cameras/
software/#firmware
If you do not have access to a computer, sup-
port is available from the local distributor
listed in the "FUJIFILM Worldwide Network"
material provided with your camera.

Product Care

When using a lens hood, do not pick up or
hold the camera using only the hood.
Keep the lens signal contacts clean.
EN-4
Use a blower to remove dust and lint from
the lens surfaces. To remove smudges and
fi ngerprints, apply a small amount of ethanol
or lens cleaner to a soft, clean cotton cloth or
lens-cleaning tissue and clean from the cen-
ter outwards using a circular motion, taking
care not to leave smears or touch the glass
with your fi ngers.
Never use organic solvents such as paint
thinner or benzene to clean the lens.
Attach the front and rear caps when the lens
is not in use.
If the lens will not be used for an extended pe-
riod, store it in a cool, dry location to prevent
mold and rust. Do not store in direct sunlight
or with naphtha or camphor moth balls.
Keep the lens dry. Rusting of the internal
mechanism can cause irreparable damage.
Leaving the lens in extremely hot locations
could cause damage or warping.
ENGLISH

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Xc50-230mmf4.5-6.7 ois iiXc16-50mmf3.5-5.6 oisXc50-230mmf4.5-6.7 ois

Tabla de contenido