This appliance is designed for household use only.
Description
1a Sliding beard comb (3 – 11 mm in 2 mm steps)
1b Sliding hair comb (13 – 21 mm in 2 mm steps)
1c Release button sliding combs
1d Fix comb 1 (1 mm)
1e Fix comb 2 (2 mm)
2a Trimmer head
2b Ear & nose trimmer head (MGK3060 only)
2c Detailed trimmer head
3
On/off button
4
Charging indicator
5
Power socket
6
Special cord set
For electric specifications, see printing on the special cord set.
Charging
Recommended ambient temperature for charging is 41 °F to 95 ° F / 5 °C to
35 °C. The battery may not charge properly or at all under extreme low or
high temperatures. Recommended ambient temperature for trimming is
60 °F to 95 °F / 15 °C to 35 °C. Do not expose the appliance to temperatures
higher than 122 °F / 50 °C for extended periods of time.
• Connect the appliance via the special cord set (6) to an electrical outlet.
• A full charge takes approx. 8 hours and provides up to 60 minutes of
cordless operation time.
• The charging indicator (4) shows that the appliance is being charged.
When the battery is fully charged, the charging indicator turns off.
• Once the appliance is completely charged, discharge it through normal
use. Then recharge again to full capacity.
Usage
Exchange the attachments only when the appliance is switched off. To turn
the appliance on, push the on/off button.
Beard Trimming / Hair Clipping
Sliding combs (1a, 1b): Place one of the combs over the trimmer head (2a).
Press the release button (1c) and slide the comb to your desired length.
7