Craftsman 580.752820 Instrucciones De Uso página 12

,
Rotate the Dial-A-Cleaner
TM
selector knob to
the OFF position to prevent detergent leakage.
How to Use ProjectPro
TM
Nozzle System
The quick-connect on the nozzle extension allows you
to switch between three different ProjectPro
TM
system
nozzles. The ProjectPro
TM
nozzles vary the pressure
and spray pattern as shown.
High Pressure
5. Engage trigger lock on spray gun when not in use.
How to Use Accessory Tray
The unit is equipped with an accessory tray with places
to store your ProjectPro
TM
nozzles, HydroFoam
TM
launcher, spray gun and nozzle extension. Identify all
accessories with the illustration on page 6.
NOTE: The extra hole in the tray is for storing a utility
brush. The extra clip in the tray is for storing a turbo
nozzle. The brush and turbo nozzle are NOT included
with your pressure washer. You can buy these items
as optional accessories.
1. Place nozzle extension through hole on accessory
tray, as shown.
Delicate General Max
40 ° Yellow 15° Orange 0 ° Red
2350 PSI 2675 PSI 3000 PSI
2.7 GPM 2.5 GPM 2.3 GPM
Follow these instructions to change ProjectPro
TM
nozzles:
Engage trigger lock on spray gun.
CAUTION
NEVER exchange ProjectPro
TM
nozzles without locking the
trigger lock on the trigger,
DO NOT twist ProjectPro
TM
nozzleswhile spraying.
2. Pull back collar on quick-connect and pull current
ProjectPro
TM
nozzle off. Store ProjectPro
TM
nozzles in holder provided on the accessory tray.
3. Select desired ProjectPro
TM
nozzle:
• For delicate rinse (lower pressure and higher
flow), for gentle cleaning of cars/trucks, boats,
RV's, patio furniture, lawn equipment, etc.,
select yellow delicate ProjectPro
TM
nozzle.
2. Place spray gun through hole on accessory tray
on right side of unit.
3. Insert multi-colored ProjectPro
TM
nozzles in
spaces provided in accessory tray.
4. Insert HydroFoam
TM
launcher in space provided in
accessory tray next to the multi-colored
ProjectPro
TM
nozzles.
12