Hilti SJD 6-A22 Manual De Instrucciones Original página 11

Careful handling and use of electric tools
▶ Secure the workpiece. A workpiece clamped in a vice or secured by some other clamping device is more
secure than when held only by hand.
Special safety instructions for jig saws
▶ Always guide the product away from your body when working with it.
▶ Never position your hands ahead of or on the saw blade.
▶ Never cut into unknown materials and keep the line of cut above and below the workpiece free of
obstacles.
▶ Never reach or grip below the workpiece while cutting.
2.4 Battery use and care
▶ Observe the special guidelines applicable to the transport, storage and use of Li-ion batteries.
▶ Do not expose batteries to high temperatures, direct sunlight or fire.
▶ Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C.
▶ Do not use or charge batteries that have suffered mechanical impact, have been dropped from a height
or show signs of damage. In this case, always contact your Hilti Service.
▶ If the battery is too hot to touch it may be defective. Put the battery in a place where it is clearly visible
and where there is no risk of fire, at an adequate distance from flammable materials. Allow the battery to
cool down. If it is still too hot to touch after an hour, the battery is faulty. Contact Hilti Service.
3 Description
3.1 Product overview
3.2 Intended use
The product described is a hand-held cordless orbital-action jig saw. It is designed to be used for cutting
plastic, wood and metal as well as drywall board and gypsum fiberboard.
The product is equipped with a removable connector for an optional vacuum cleaner / dust removal hose.
This connector is designed to fit standard suction hoses. In order to connect the suction hose to the product,
use of a suitable adapter may be necessary.
*2150254*
1
2150254
Lockbutton
@
On/off switch
;
Grip
=
Stroke rate regulator thumbwheel
%
Battery state of charge indicator
&
Battery release button
(
Battery
)
Air vents
+
Suction adapter
§
Catches
/
Base plate
:
Cutting angle adjustment scale
∙
Orbital-action adjustment lever
$
Saw blade
£
Contact guard
|
Guard
¡
Blade holder
Q
LED light
W
Saw blade release lever
E
Anti-splinter insert
R
Electric supply for the SJD DRS-6A dust re-
T
moval module (accessory)
English 5