Technical Data - LaserLiner VideoScope Plus Manual De Instrucciones

Instructions for use
• It is absolutely vital to ensure that the VideoScope Plus does not come into contact with chemicals,
current, moving or hot objects. This can damage the device and put its user at risk of serious injury.
• The LCD unit must not be immersed in water.
• The camera head is not acid-resistant or fireproof.
• The VideoScope Plus must not be used for medical examinations / examining people.
• Strong vibrations and extreme deviations in temperature should be avoided.
• The unit is not suitable for taking measurements close to dangerous voltages. Therefore always make
sure that conductive parts are at zero potential when carrying out measurements in the vicinity of
electrical systems. Safe isolation from the power supply and precautions to prevent systems being
switched on again must be ensured by implementing suitable measures.

Technical Data

Camera head
Camera focus
Screen type
Display resolution
Camera resolution
Image/Video resolution
Image format/Video format
LED
Zoom
Memory
Port
Connections
Length of flex cable
Power supply
Operating temperature
Storage temperature
Weight incl. batteries
EU directives and disposal
This device complies with all necessary standards for
the free movement of goods within the EU.
This product is an electric device and must be collected separately
for disposal according to the European Directive on waste electrical
and electronic equipment.
Further safety and supplementary notices at: www.laserliner.com/info
VideoScope Plus
ø 9 mm, water-resistant, IP 67
F3 cm - F7 cm
3,5" TFT colour display
320 x 240 pixels
640 x 480 pixels
720 x 480 pixels
JPEG / AVI
10 brightness levels
1.5x digital zoom in 10% increments
Supports up to max. 8 GB SDHC card
Mini USB
Micro-SD, Analog-video
2 m
4 x AA 1.5 V batteries
0 °C ... 45 °C
-10°C ... 60°C
0,58 kg
Technical revisions reserved. 09.15.
GB
19