Safety Notes; Installation Instructions; Symbol Description - Hansgrohe MySelect S 1jet Set 65 26711400 Modo De Empleo/Instrucciones De Montaje

Safety Notes

Gloves should be worn during installation to prevent
crushing and cutting injuries.
The product may only be used for bathing, hygienic
and body cleaning purposes.
The product may not be used as a holding handle. A
separate handle must be installed.
Shower hoses are only suitable for a connection
from the shower to the fitting. Never fit a shut-off
device between the fitting and the hose.

Installation Instructions

• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.
• Where the contractor mounts the product, he should
ensure that the entire area of the wall to which the
mounting plate is to be fitted, is flat (no projecting
joints or tiles sticking out), that the structure of the wall
is suitable for the installation of the product and has
no weak points. The enclosed screws and dowels are
only suitable for concrete. For another wall construc-
tions the manufacturer's indications of the dowel
manufacturer have to be taken into account.
• Optimal functioning is only guaranteed with the com-
bination of Hansgrohe hand showers and Hansgrohe
shower hoses.
• Operation and function of hand shower, see enclosed
brochure.
4
English

Symbol description

Assembly see page 32
Do not use silicone containing acetic acid!
Dimensions (see page 31)
Operation (see page 33)
Spare parts (see page 34)
Special accessories (order as an
extra)
tile-matching-disk chrome plated
#95163000 (see page 34)
Cleaning (see enclosed brochure)
Test certificate (see page 36)