Front Panel Control - LDLC M27 Manual Del Usuario

FRONT PANEL CONTROL

 Power Button:
Press this button to switch ON/OFF of monitor's power.
 Power Indicator:
— Power On mode.
Blue
Amber — Power Saving mode.
 MENU / RETURN:
Turn the OSD menu on/off or return to the previous menu.
 Adjust ꓥ or ꓦ :
1. Adjust Brightness and volume when the OSD is off.
2. Navigate through adjustment icons when OSD is ON or adjust a function when
function is activated.
i/ENTER button:

1. Press i/ENTER to enter Source selections when the OSD menu if off. Press ꓥ or
ꓦ to select the input source. Validate using the Enter key
2. The i/ENTER button is used to confirm your selections in the OSD Menu.
3. Press and hold this button more than 3 seconds will start 「Auto Adjust」 function
when using VGA input only. (The auto adjustment function is used to optimize the
「horizontal position」, 「vertical position」,「clock」,and 「phase」.)
Hotkeys:

1. RESTORING BRIGHTNESS AND CONTRAST SETTINGS:
To restore the Brightness and Contrast settings with the default values, chose the
Brightness/Contrast setting in the OSD, and simultaneously press on ꓥ and ꓦ.
2. ASPECT RATIO:
Press MENU + ꓥ key to change to 「FULL MODE」 or 「FIT」.